LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Grand Vitara Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Immobilizer System) >> Repair Instructions >> Procedure After ECM Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Procedure After ECM Replacement

WARNING: This page is about a different car, the 2007 Suzuki Grand Vitara and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

After ECM is replaced with new one or used one, the transponder code in the transponder built in the ignition key has to be registered with ECM. To register transponder code in the ignition key with ECM, perform "Replace New ECM" mode of SUZUKI scan tool referring to SUZUKI Tech 2 Operator's Manual.

NOTE: A maximum of four transponder codes can be registered with ECM.
scientia non olet · About LEMON Manuals