LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Grand Vitara Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Fuel System) >> Repair Instructions >> Fuel Injector On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove surge tank cover.
  2. Using sound scope (1) or such, check operating sound of injector when engine is running or cranking.

    Cycle of operating sound should vary according to engine speed.

    If no sound or an unusual sound is heard, check injector circuit (wire or coupler) or injector.

    Fig 1: Checking Operating Sound Of Injector
    G04807595Courtesy of SUZUKI OF AMERICA CORP.
  3. Disconnect connector (1) from injector, connect ohmmeter between terminals of injector and check resistance.

    Reference resistance of fuel injector 

    11.5 - 12.5 Ω at 20°C, 68°F 

    Fig 2: Checking Resistance Of Injector Terminals
    G04807596Courtesy of SUZUKI OF AMERICA CORP.
  4. Connect connector to injector securely.