EVAP Leak Check Module Removal And Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

For installation, reverse removal procedure noting the following.

Apply gasoline to O-ring of EVAP leak check module.
Tighten EVAP leak check module bolts to specified torque.
Tightening torque

EVAP leak check module bolt a: 5.5 N.m (0.55 kg-m, 4.0 lb-ft)

Fig 1: Identifying EVAP Leak Check Module Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install EVAP canister with EVAP leak check module referring to EVAP CANISTER REMOVAL AND INSTALLATION .