DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK . |
| 2 | DTC check
Is there DTC(s) other than P2008? |
Go to applicable DTC(s). | Go to Step 3. |
| 3 | IMRC valve motor drive circuit (open) and IMRC valve motor drive circuit (close) check
Are they in good condition? |
Go to Step 4. | Repair or replace defective wire harness. |
| 4 | IMRC valve motor check
Is it in good condition? |
Substitute a known-good ECM and recheck. | Replace IMRC valve. Refer to IMRC (INTAKE MANIFOLD RUNNER CONTROL) VALVE INSPECTION . |