Exhaust System Check
CAUTION:
Touching a hot exhaust system component will cause a burn.
Do not perform any service work on the exhaust system until the exhaust system is cool.
Do not perform any service work on the exhaust system until the exhaust system is cool.
At every periodical vehicle inspection, and when vehicle is raised for other service, check exhaust system as follows:
- Check rubber mountings for damage, deterioration, and out of position.
- Check distortion of exhaust manifold seating surface(s) of cylinder head.
- Check exhaust system for exhaust fume leakage, loose connection, dent and damage.
- If bolts or nuts are loosened, tighten them to specified torque.
- Check any damages, holes or cracks which may permit exhaust fumes to enter the vehicle.
- Make sure that exhaust system components have enough clearance from other underbody components to avoid overheating and possible damage to these components.
- Any defect should be fixed at once whenever it is found.