| Charging indicator light does not come on with ignition ON and engine off |
Fuse blown |
Replace fuse
. |
| CAN communication line faulty |
Repair or replace CAN communication line
. Refer to CAN DTC (LOST COMMUNICATION AND COMMUNICATION BUS OFF) TABLE |
| Combination meter faulty |
Replace combination meter
. Refer to COMBINATION METER REMOVAL AND INSTALLATION |
| BCM faulty |
Check BCM
. Refer to BCM POWER CIRCUIT AND GROUND CIRCUIT CHECK |
| Wiring faulty |
Repair wiring
. |
| IC regulator or field coil faulty |
Repair or replace generator
. Generator Components |
| Charging indicator light does not go out with engine running (battery requires frequent recharging) |
Accessory drive belt loose or worn |
Replace accessory drive belt
. Refer to Accessory Drive Belt Removal and Installation |
| IC regulator or generator faulty |
Replace generator
. Refer to Generator Removal and Installation |
| Wiring faulty |
Repair wiring
. |