LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Grand Vitara Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Program >> Diagnostic Information and Procedures >> DTC C1039: Yaw Rate/G Sensor Assembly Internal Failure >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

Step Action Yes No
1  Was "Electronic Stability Program Check" performed?  Go to Step 2. Go to ELECTRONIC STABILITY PROGRAM CHECK .
2  DTC check 
  1. Connect scan tool to DLC with ignition switch turned OFF.
  2. Turn ignition switch ON and check DTC.

Are DTC C1034 and/or C1073 detected? 		 Go to applicable DTC diag. flow. Go to Step 3.
3  Check sensor calibration 
  1. Calibrate yaw rate/G sensor assembly. Refer to SENSOR CALIBRATION OF ESP® Components .
  2. Clear all DTC(s) and recheck DTC.

Is DTC C1039 still detected? 		 Go to Step 4. Yaw rate/G sensor assembly calibration was incomplete.
4  Check yaw rate/G sensor assembly 
  1. Check yaw rate/G sensor assembly. Refer to Yaw Rate/G Sensor Assembly On-Vehicle Inspection .

Is it good condition? 		 Substitute a known-good ESP® hydraulic unit/control module assembly and recheck. Replace yaw rate/G sensor assembly.
scientia non olet · About LEMON Manuals