LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Grand Vitara Base >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Immobilizer Control System >> Repair Instructions >> Immobilizer Control Module (ICM) Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Immobilizer Control Module (ICM) Removal and Installation: Removal

  1. Disconnect negative (-) cable from battery.
  2. Disable air bag system referring to DISABLING AIR BAG SYSTEM: Advanced Air Bag  or DISABLING AIR BAG SYSTEM: Except Advanced Air Bag  .
  3. Remove driver air bag (inflator) module referring to DRIVER AIR BAG (INFLATOR) MODULE REMOVAL AND INSTALLATION: Advanced Air Bag  or DRIVER AIR BAG (INFLATOR) MODULE REMOVAL AND INSTALLATION: Except Advanced Air Bag  .
  4. Remove steering wheel referring to STEERING WHEEL REMOVAL AND INSTALLATION .
  5. Remove steering column lower and upper covers.
  6. Remove engine start knob (1). (If equipped with keyless start system)
    Fig 1: Identifying Engine Start Knob
    G08899744Courtesy of SUZUKI OF AMERICA CORP.
  7. Disconnect connector (1) from ICM (2).
  8. Remove a screw (3) from ICM.
    Fig 2: Identifying ICM, Connector And Screw
    G08899745Courtesy of SUZUKI OF AMERICA CORP.
  9. Remove ICM from steering lock assembly or steering lock unit.
scientia non olet · About LEMON Manuals