CVT System Check: Notes

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Refer to the following items for the details of each step.

SYMPTOM DIAGNOSIS DESCRIPTION CHART

Step	Action	YES	NO
1	Customer complaint analysis Perform customer complaint analysis see Step 1. Customer Complaint Analysis . Was customer complaint analysis performed?	Go to Step 2.	Perform customer complaint analysis.
2	DTC/freeze frame data check, record and clearance see Step 2. DTC/Freeze Frame Data Check, Record and Clearance Check for DTC (including pending DTC). Is there any DTC(s)?	Print DTC and freeze frame data or write them down and clear them by referring to DTC CLEARANCE . Then go to Step 3.	Go to Step 4.
3	Visual inspection see Step 3 and 4. Visual Inspection Perform visual inspection. Is there any faulty condition?	Repair or replace malfunction part. Then go to Step 11.	Go to Step 5.
4	Visual inspection see Step 3 and 4. Visual Inspection Perform visual inspection. Is there any faulty condition?	Repair or replace malfunction part. Then go to Step 11.	Go to Step 8.
5	Trouble symptom confirmation see Step 5. Trouble Symptom Confirmation Confirm trouble symptom. Is trouble symptom identified?	Go to Step 6.	Go to Step 7.
6	Rechecking and recording of DTC/freeze frame data see Step 6 and 7. Rechecking and Record of DTC and Freeze Frame Data Recheck for DTC and freeze frame data. Is there any DTC(s)?	Go to Step 9.	Go to Step 8.
7	Rechecking and recording of DTC/freeze frame data see Step 6 and 7. Rechecking and Record of DTC and Freeze Frame Data Recheck for DTC and freeze frame data. Is there any DTC(s)?	Go to Step 9.	Go to Step 10.
8	CVT basic check and CVT symptom diagnosis see Step 8. CVT Basic Check and CVT Symptom Diagnosis Perform CVT basic check and CVT symptom diagnosis. Are check and repair completed?	Go to Step 11.	Check and repair malfunction part(s). Then go to Step 11.
9	Troubleshooting for DTC see Step 9. Troubleshooting for DTC Perform troubleshooting for applicable DTC. Are check and repair completed?	Go to Step 11.	Check and repair malfunction part(s). Then go to Step 11.
10	Intermittent problems check see Step 10. Intermittent Problems Check Check for intermittent problem. Is there any faulty condition?	Repair or replace malfunction part(s). Then go to Step 11.	Go to Step 11.
11	Final confirmation test see Step 11. Final Confirmation Test Perform final confirmation test. Is there any problem symptom, DTC or abnormal condition?	Go to Step 6.	End.