Compressor Assembly Removal and Installation: Installation

Reverse removal procedure noting the following instructions:

If compressor is replaced, pour new compressor oil referring to "REPLENISHING COMPRESSOR OIL " in OPERATION PROCEDURE FOR REFRIGERANT CHARGE: MANUAL A/C.
Tighten compressor mounting bolts to specified torque in numerical order ("1" through "3") as shown in figure.
Tightening torque

Compressor mounting bolt (a): 25 N.m (2.5 kg-m, 18.0 lbf-ft)
Tighten Discharge hose bolt and suction hose bolt to specified torque.
Tightening torque

Discharge hose bolt (b): 11 N.m (1.1 kg-m, 8.0 lbf-ft)

Suction hose bolt (c): 11 N.m (1.1 kg-m, 8.0 lbf-ft)

Fig 1: Identifying Discharge Hose Bolt And Suction Hose Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Evacuate and charge the A/C system referring to "EVACUATION " and "CHARGE " in OPERATION PROCEDURE FOR REFRIGERANT CHARGE: MANUAL A/C.