CVT Fluid Check: Notes
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Failure to take the following precautions when checking the CVT fluid may cause failure of the CVT.
- Do not use any fluid other than the specified CVT fluid. Use of any other fluids may cause juddering or other faulty conditions.
- Avoid overfilling the CVT. If the CVT is filled with too much fluid, the fluid can foam and flow out through the breather. The resulting loss of fluid may cause slippage and failure of the transaxle.
- Use only lint-free paper for wiping. Do not use cloth or rags.
- Do not reuse CVT fluid.
- Replace CVT fluid when the CVT assembly is replaced and also when the vehicle has been driven under excessively high load.
NOTE:
- Be sure to perform CVT fluid level check before checking any service on CVT.
- Do not replenish or drain CVT fluid before each test.