Engine Control Module (ECM) Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure noting the following:

Connect connectors to ECM as follows.
1. Make sure that lock lever of ECM connector is unlock position.
  
  Fig 1: Connecting Connectors To ECM
  Courtesy of SUZUKI OF AMERICA CORP.
2. Insert ECM connectors to ECM until it stops with unlocked lock lever.
  
  Fig 2: Inserting ECM Connectors To ECM With Unlocked Lock Lever
  Courtesy of SUZUKI OF AMERICA CORP.
3. Lock ECM connectors securely by pulling its lock lever up.
  
  Fig 3: Locking ECM Connectors
  Courtesy of SUZUKI OF AMERICA CORP.