Accelerator Pedal Position (APP) Sensor Assembly Removal and Installation: Installation
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Reverse removal procedure for installation noting the following.
- Tighten APP sensor assembly upper nut (1) first and then lower nuts (2) to specified torque.
Tightening torque
APP sensor assembly nut (a): 6 N.m (0.6 kg-m, 4.5 lbf-ft)
- Connect connector to APP sensor assembly securely.