Enabled conditions
SECONDARY PRESSURE CONTROL SOLENOID VALVE RATIONALITY MONITOR ENABLED CONDITIONS CHART
| Parameter | Minimum | Maximum |
|---|---|---|
| P0776: | ||
| Shift position | "D" range | |
| Vehicle speed | 10 km/h (6 mile/h) | - |
| Accelerator pedal position | 12.5% | - |
| Engine speed | 450 RPM | - |
| Line pressure control solenoid valve | No DTC (P0962, P0963) | |
| Stepper motor | No DTC (P1816) | |
| Transmission range sensor | No DTC (P0707, P0705) | |
| Secondary pressure control solenoid valve | No DTC (P0966, P0967) | |
| Primary pulley speed sensor | No DTC (P0717, P0716) | |
| Secondary pulley speed sensor | No DTC (P0722, P0721) | |
| Primary pressure sensor | No DTC (P0842, P0843) | |
| Secondary pressure sensor | No DTC (P0847, P0848) | |
| TCC solenoid valve | No DTC (P2764, P2763) | |
| Lock-up/select switching solenoid valve | No DTC (P1810) | |
| CAN communication | No DTC (U0100, U0073) | |
| Battery voltage | 10.5 V | - |
| P0777: | ||
| Shift position | Other than "N" range | |
| Brake light switch | OFF | |
| Transmission fluid temperature | -20 °C (-4 °F) | - |
| Change rate of vehicle speed | - | +/- 15 km/h/10 ms |
| Change rate of accelerator pedal position | - | +/- 6.25%/10 ms |
| CAN communication | No DTC (U0100, U0073) | |
| Line pressure control solenoid valve | No DTC (P0962) | |
| Secondary pressure control solenoid valve | No DTC (P0966) | |