Enable conditions
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
SECONDARY PRESSURE CONTROL SOLENOID VALVE RATIONALITY MONITOR ENABLE CONDITIONS CHART
| Parameter | Minimum | Maximum |
|---|---|---|
| P0776: | ||
| Shift position | "D" range | |
| Vehicle speed | 10 km/h (6 mile/h) | - |
| Accelerator pedal position | 12.5% | - |
| Engine speed | 450 RPM | - |
| Line pressure control solenoid valve | No DTC (P0962, P0963) | |
| Stepper motor | No DTC (P1816) | |
| Transmission range sensor | No DTC (P0707, P0705) | |
| Secondary pressure control solenoid valve | No DTC (P0966, P0967) | |
| Primary pulley speed sensor | No DTC (P0717, P0716) | |
| Secondary pulley speed sensor | No DTC (P0722, P0721) | |
| Primary pressure sensor | No DTC (P0842, P0843) | |
| Secondary pressure sensor | No DTC (P0847, P0848) | |
| TCC solenoid valve | No DTC (P2764, P2763) | |
| Lock-up/select switching solenoid valve | No DTC (P1810) | |
| CAN communication | No DTC (U0100, U0073) | |
| Battery voltage | 10.5 V | - |
| P0777: | ||
| Shift position | Other than "N" range | |
| Brake light switch | OFF | |
| Transmission fluid temperature | -20 °C (-4 °F) | - |
| Change rate of vehicle speed | - | +/- 15 km/h/10 ms |
| Change rate of accelerator pedal position | - | +/- 6.25%/10 ms |
| CAN communication | No DTC (U0100, U0073) | |
| Line pressure control solenoid valve | No DTC (P0962) | |
| Secondary pressure control solenoid valve | No DTC (P0966) | |