LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 LE, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Aux. Emission Control Devices) >> Diagnostic Information and Procedures >> EVAP Leak Check Module Circuit Inspection >> EVAP Canister Vent Valve Circuit Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVAP Canister Vent Valve Circuit Check

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Operate EVAP canister vent valve referring to Step 6) of EVAP LEAK CHECK SYSTEM SMOKE TEST .
  2. Check that operating sound of EVAP canister vent valve (1) is heard only when EVAP canister vent valve is switched ON and OFF.

    If operating sound of EVAP canister vent valve is heard, EVAP canister vent valve and its circuit are in good condition. If operating sound of EVAP canister vent valve is not heard, check EVAP canister vent valve, wire harness and connections.

    Fig 1: Identifying EVAP Canister Vent Valve
    G06866884Courtesy of SUZUKI OF AMERICA CORP.