LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 LE, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Camshaft Position (CMP) Sensor Removal and Installation >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Camshaft Position (CMP) Sensor Removal and Installation: Installation

  1. Install CMP sensor to cylinder head.

    Tightening torque 

    CMP sensor bolt (a): 11 N.m (1.1 kg-m, 8.0 lbf-ft) 

    Fig 1: Identifying CMP Sensor Bolt
    G06868201Courtesy of SUZUKI OF AMERICA CORP.
  2. Connect connector to CMP sensor securely.
  3. Install air cleaner case. See AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION
  4. Connect negative cable to battery.
scientia non olet · About LEMON Manuals