Reduction Drive Gear Assembly Disassembly and Reassembly: Reassembly

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Clean all components thoroughly, inspect them for any abnormality and replace with new one as necessary.
Install bearings (1) to reduction drive gear (2) using special tool, bearing puller (3) and hydraulic press (4).
Special Tool

(A): 09913-85230

Fig 1: Installing Bearings To Reduction Drive Gear Using Special Tool
Courtesy of SUZUKI OF AMERICA CORP.