Water Pump Removal and Installation: Installation
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Reference: WATER PUMP INSPECTION
Reverse removal procedure for installation noting the following points.
- Use new gasket and O-ring.
- Install water pump assembly to cylinder block and tighten bolts to specified torque.
Tightening torque
Water pump bolt (a): 25 N.m (2.5 kg-m, 18.5 lbf-ft)
- Refill cooling system, see Cooling System Refilling .
- Verify that there is no coolant leakage at each connection.