LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Body Electrical Control System) >> Diagnostic Information and Procedures >> DTC Clearance >> Without Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to OFF position.
  2. Perform following Steps  a) to  d) within 10 seconds after ignition switch is turned ON and engine stops.
    1. Turn headlight switch to "SMALL" position.
    2. Turn headlight switch to "OFF" position.
    3. Repeat Steps  a) and  b) 3 times.
    4. Press and release driver side door switch 4 times.
  3. After completing above Steps, confirm that no malfunction DTC is detected.
scientia non olet · About LEMON Manuals