LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Body Electrical Control System) >> Diagnostic Information and Procedures >> DTC Clearance >> Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect SUZUKI scan tool to data link connector in the same manner as when making this connection for DTC check.
  2. Turn ignition switch ON and engine stops.
  3. Erase DTC according to instructions displayed on scan tool. Refer to scan tool operators manual for further details.
  4. After completing the clearance, turn ignition switch off and disconnect scan tool from data link connector.
scientia non olet · About LEMON Manuals