Tightening Torque Specifications
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Tensioner bolt | 25 | 2.5 | 18.5 |
| Idler pulley bolt | 40 | 4.1 | 29.5 |
| Idler pulley nut | 40 | 4.1 | 29.5 |
| "B" terminal wire nut | 11 | 1.1 | 8.5 |
| Generator bolt | 45 | 4.6 | 33.5 |
| Power steering pump stay bolt | 25 | 2.5 | 18.5 |
NOTE:
The specified tightening torque is described in the following.
GENERATOR COMPONENTS
GENERATOR COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .