LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Security And Locks) >> Diagnostic Information and Procedures >> Keyless Entry System Operation Inspection (If Equipped)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Entry System Operation Inspection (If Equipped)

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When performing the this inspection, make sure to have any of the door once opened/closed after the ignition key has been removed from the ignition key cylinder.
  1. Confirm that power door lock system operates normally, refer to POWER DOOR LOCK SYSTEM OPERATION INSPECTION .
  2. All doors are closed and unlocked.
  3. Check the following operation:
    1. Push "lock" button (1) on transmitter (2) or remote controller once, and check all doors lock and hazard waning lights flash once.
    2. Push "unlock" button (3) on transmitter (2) or remote controller twice, and check all doors unlock and hazard waning lights flash twice and interior light turns on several seconds with the interior light switch in the middle position.

If malfunction is found, go to KEYLESS ENTRY SYSTEM SYMPTOM DIAGNOSIS (IF EQUIPPED) .

Fig 1: Identifying Keyless Entry System Components
G06868886Courtesy of SUZUKI OF AMERICA CORP.