Tightening Torque Specifications
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kgf-m | lbf-ft | ||
| Propeller shaft bolt | 23 | 2.3 | 17.0 | |
| Center support nut | 50 | 5.1 | 37.0 | Use care not to drop it. Otherwise, vibration may occur during driving. |
NOTE:
The specified tightening torque is described in the following.
PROPELLER SHAFT CONSTRUCTION
PROPELLER SHAFT CONSTRUCTION
Reference:
For the tightening torque of fastener not specified in this service information, refer to FASTENERS INFORMATION .