LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Repair Instructions >> Oil Pump Assembly Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pump Assembly Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Drain engine oil.
  3. Remove oil pan and oil pump strainer. See OIL PAN AND OIL PUMP STRAINER REMOVAL AND INSTALLATION .
  4. Remove baffle plate from lower crank case (1).
  5. Remove oil pump sprocket cover (2).
    Fig 1: Removing Oil Pump Sprocket Cover
    G06869269Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove oil pump (2) with sprocket from lower crank case (1).
    Fig 2: Removing Oil Pump With Sprocket From Lower Crank Case
    G06869270Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals