DTC Detecting Condition and Trouble Area
P0722 SYMPTOM DIAGNOSIS DESCRIPTION CHART
| DTC detecting condition |
Trouble area |
DTC P0722: Output Speed Sensor Circuit No Signal
This DTC is detected if any one of the following conditions is fulfilled.
- The secondary pulley speed is lower than 150 RPM for 5 sec. in a row when the primary pulley speed is more than 1000 RPM.
- The secondary pulley speed is 0 RPM for specified times when the vehicle speed is more than 10 km/h (6 mile/h).
(1 D/C detection logic) |
- Secondary pulley speed sensor and/or its circuit
- TCM
|