DTC Detecting Condition and Trouble Area
P0716 SYMPTOM DIAGNOSIS DESCRIPTION CHART
| DTC detecting condition |
Trouble area |
DTC P0716: Input/Turbine Speed Sensor "A" Circuit Range/Performance
This DTC is detected if all the following conditions are met.
- Difference between engine speed and primary pulley speed is more than 1000 RPM for 5 sec. when lock-up on.
- Difference between measured value and estimated value of primary pulley speed is more than 1000 RPM for 5 sec. when lock-up on.
(2 D/C detection logic) |
- Primary pulley speed sensor and/or its circuit
- Secondary pulley speed sensor and/or its circuit
- TCM
|