LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Crossover, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission/Transaxle) >> Repair Instructions >> Back Up Lamp Switch Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Back Up Lamp Switch Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove battery and tray with ECM. See ENGINE CONTROL MODULE (ECM) REMOVAL AND INSTALLATION .
  2. Remove air cleaner assembly. See AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION .
  3. Disconnect back up lamp switch connector (1).
  4. Remove back up lamp switch.
    Fig 1: Identifying Back Up Lamp Switch Connector
    G06868605Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals