Clutch Fluid Pipe Removal and Installation: Installation
WARNING: This page is about a different variant/trim than selected.
Reference: CLUTCH FLUID PIPE INSPECTION
Reverse removal procedure for installation noting the following.
CAUTION:
Brake fluid is extremely damaging to painted surfaces. If brake fluid contacts a painted surface, immediately wipe it off and flush the surface thoroughly with water.
- Install each clamp securely.
- After installation, check clutch pedal free travel and bleed air from clutch system.
- Clutch Pedal free travel: See CLUTCH PEDAL INSPECTION .
- Bleed air: See AIR BLEEDING OF CLUTCH SYSTEM .
- Check fluid leakage.
- Add fluid to MAX level of reservoir.