DTC Troubleshooting

C1057: SYMPTOM TROUBLESHOOTING REFERENCE CHART

Step	Action	YES	NO
1	Was "Electronic Stability Program Check" performed?	Go to Step 2.	Go to "ELECTRONIC STABILITY PROGRAM CHECK ".
2	Check ESP® hydraulic unit/control module assembly power supply and ground circuit Check that ESP® hydraulic unit/control module assembly power supply circuit and ground circuit is in good condition referring to ESP® HYDRAULIC UNIT/CONTROL MODULE ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT CHECK . Are check results OK?	Go to Step 3.	Repair ESP® hydraulic unit/control module assembly power supply or ground circuit.
3	ESP® hydraulic unit/control module power supply voltage check Measure battery voltage with engine running at 3000 RPM. Is voltage 15 V or less?	Substitute a known-good ESP® hydraulic unit/control module assembly and recheck.	Check charging system referring to GENERATOR TEST .