LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> Steering >> Power Steering >> Power Assisted Steering System - Hydraulic >> Repair Instructions >> Tie-Rod/Rack Boot Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tie-Rod/Rack Boot Removal and Installation: Removal

  1. Remove steering gear case from vehicle referring to STEERING GEAR CASE ASSEMBLY REMOVAL AND INSTALLATION: HYDRAULIC TYPE .
  2. For ease of adjustment after installation, make marking (4) of tie-rod end lock nut position of tie-rod thread.
  3. Loosen tie-rod end lock nut (2) and remove tie-rod end.
  4. Remove boot band and clip.
  5. Remove boot (3) from tie-rod (1).
    Fig 1: Removing Boot From Tie-Rod
    G06867537Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove tie-rod (2) from rack (3).
    Fig 2: Removing Tie-Rod From Rack
    G06867538Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals