Forward Impact-Sensor Inspection
Reference: FORWARD IMPACT-SENSOR REMOVAL AND INSTALLATION: ADVANCED AIR BAG
WARNING:
During service procedures, be very careful when handling a sensor.
- Never strike or jar a sensor.
- A sensor and mounting bracket bolts must be carefully torqued to assure proper operation. Under loose connection, it could cause improper operation of the air bag system.
CAUTION:
- Never disassemble forward impact-sensor.
- Sensor should be replaced when it was dropped from a height of 90 cm (3 ft) or more.
- Check sensor for dents, cracks or deformation.
- Check sensor connector (sensor side and harness side) and sensor connector lock mechanism for damage or crack.
- Check connector terminals for bend, corrosion or rust.