Disabling Air Bag System
NOTE:
With "A/B" fuse removed and ignition switch ON, "AIR BAG" warning light will be ON. This is normal operation and does not indicate air bag system malfunction.
- Turn steering wheel so that vehicle's wheels (front tires) are pointing straight ahead.
- Disconnect negative (-) cable at battery.
- Turn ignition switch to "LOCK" position and remove key.
- Remove "A/B" fuse from fuse box.
- Remove driver side front pillar lower trim and disconnect yellow connector (1) for driver air bag as follows.
- Release locking of lock slider (2).
- After unlocked, disconnect connector.
- Remove passenger side front pillar lower trim and disconnect yellow connector (3) for passenger air bag as follows.
- Release locking of lock slider (2).
- After unlocked, disconnect connector.
- Disconnect yellow connector of side-air bag (inflator) module under front seat cushion (1).
- Release locking of lock slider (2).
- After unlocked, disconnect connector.
- Disconnect connector of side curtain-air bag (inflator) module as follows.
For hatchback model:
- Remove rear side-air bag. See Rear Side-Air Bag (Inflator) Module Removal and Installation .
For sedan model:
- Remove rear seat side back. See REAR SEAT REMOVAL AND INSTALLATION .
- Unlock lock button (2) of black connector (1).
- With lock button unlocked, disconnect connector.
- Disconnect connector of curtain air bag (inflator) module as follows.
For hatchback model:
- Release locking of lock slider (2) of yellow connector (1).
- With unlocked, disconnect connector.
For sedan model:
- Remove rear pillar inner trim.
- Unlock lock button (2) of black connector (1).
- With lock button unlocked, disconnect connector.