HVAC Unit Removal and Installation: Installation

Reference: EVAPORATOR INSPECTION: MANUAL A/C 

Reference: EVAPORATOR TEMPERATURE SENSOR INSPECTION: MANUAL A/C 

Reverse removal procedure noting the following instructions:

• Replenish specified amount of compressor oil to compressor suction side referring to "REPLENISHING COMPRESSOR OIL " in OPERATION PROCEDURE FOR REFRIGERANT CHARGE: MANUAL A/C.
• Install the padding (1) to the installation hole uniformly.
  Fig 1: Identifying Padding To Installation Hole

  Courtesy of SUZUKI OF AMERICA CORP.
• Evacuate and charge the A/C system referring to "EVACUATION " and "CHARGE " in OPERATION PROCEDURE FOR REFRIGERANT CHARGE: MANUAL A/C.
• Refill cooling system with coolant referring to COOLING SYSTEM REFILLING .
• Adjust control cables referring to HVAC CONTROL UNIT REMOVAL AND INSTALLATION . (vehicle with manual type A/C)