LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Repair Instructions >> Primary Pulley Speed Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Pulley Speed Sensor Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative cable from battery.
  2. Remove air cleaner inlet hose. See AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION
  3. Disconnect connector (1) from primary pulley speed sensor.
  4. Remove primary pulley speed sensor (2) from transaxle.
    Fig 1: Identifying Primary Pulley Speed Sensor
    G06866791Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals