P/S Pressure Switch Inspection
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
- Prepare SUZUKI scan tool.
- With ignition switch turned OFF, connect it to DLC (1) located on underside of instrument panel at driver's seat side.
Special Tool
(A): SUZUKI scan tool (SUZUKI-SDT)
- Start engine and select "PSP Switch" in "Data list" mode on scan tool.
- Check that P/S pressure switch is following condition when steering wheel is turned left or right. If check result is not satisfactory, repair P/S pressure switch circuit or replace P/S pressure switch.
P/S pressure sensor specification
Steering wheel at free: OFF
Steering wheel turned left or right: ON