LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P0826: Manual mode Control Circuit >> DTC Detecting Condition and Trouble Area
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detecting Condition and Trouble Area

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
P0826 SYMPTOM DIAGNOSIS DESCRIPTION CHART

DTC detecting condition Trouble area
DTC P0826: Manual mode Control Circuit 
This DTC is detected if any one of the following conditions is fulfilled.
  • Manual mode switch ON signal continues to be input for more than 5 sec. even after "P", "R" or "N" range signal input.
  • ON signal of shift-down switch or shift-up switch is input for more than 5 sec. even while manual mode switch is OFF.

(1 D/C detection logic)
  • Manual mode shift switch (include manual mode switch, shift-up switch and shift-down switch) and/or its circuit
  • TCM