DTC Detecting Condition and Trouble Area

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

P0722 SYMPTOM DIAGNOSIS DESCRIPTION CHART

DTC detecting condition	Trouble area
DTC P0722: Output Speed Sensor Circuit No Signal This DTC is detected if any one of the following conditions is fulfilled. The secondary pulley speed is lower than 150 RPM for 5 sec. in a row when the primary pulley speed is more than 1000 RPM. The secondary pulley speed is 0 RPM for specified times when the vehicle speed is more than 10 km/h (6 mile/h). (1 D/C detection logic)	Secondary pulley speed sensor and/or its circuit TCM