Right Case Disassembly and Reassembly: Disassembly

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Remove differential side oil seal from right case, if necessary, see Differential Side Oil Seal Replacement .
Remove differential side bearing outer race (1) using brass bar (2), if necessary.

Fig 1: Identifying Right Case Components
Courtesy of SUZUKI OF AMERICA CORP.
Remove input shaft oil seal using special tool, if necessary.
Special Tool
1. 09913-75830
  
  Fig 2: Removing Input Shaft Oil Seal Using Special Tool
  Courtesy of SUZUKI OF AMERICA CORP.
Break oil channel (1) with a flat end rod or the like and remove it in order to install special tool to countershaft right bearing outer race.

Fig 3: Identifying Oil Channel
Courtesy of SUZUKI OF AMERICA CORP.
Remove countershaft right bearing outer race using special tools, if necessary.
Special Tool
1. 09942-15511
2. 09944-96011
  
  Fig 4: Identifying Special Tools For Countershaft Right Bearing Outer Race
  Courtesy of SUZUKI OF AMERICA CORP.