Suspension Arm Bush Disassembly and Reassembly: Disassembly

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Cut off bush flange (rubber) (1) with knife.

Fig 1: Cutting Off Bush Flange (Rubber) With Knife
Courtesy of SUZUKI OF AMERICA CORP.
Push out bush by using hydraulic press (2) and special tools.
NOTE: Any removed bush will not fit properly if you reuse it. Always use a new bush.

Special Tool
1. 09943-76310
2. 09913-75821
  
  Fig 2: Pushing Out Bush Using Hydraulic Press And Special Tools
  Courtesy of SUZUKI OF AMERICA CORP.