Steering Angle Inspection and Adjustment
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
When tie-rod or tie-rod end was replaced, check toe and then also steering angle with turning radius gauge. If measured value is out of specified value, perform inspection and adjustment of toe.
Steering angle
Inside:
- other than 17 inch wheel model: 36° ± 2°
- 17 inch wheel model: 35°42' ± 2°
Outside:
- other than 17 inch wheel model: 32°6' (Reference)
- 17 inch wheel model: 31°54' (Reference)