Front Suspension Frame, Stabilizer Bar and/or Bush Removal and Installation (4WD Model): Installation

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FRONT SUSPENSION FRAME CHECK

CAUTION: The front suspension frame bolts are pre-coated with friction stabilizer. If these bolts are reused, they may work loose. Be sure to replace the front suspension frame bolts with new ones whenever they are removed.

Install front suspension frame by reversing removal procedure, noting the following instruction.

Tighten all fasteners to specified torque referring to FRONT SUSPENSION CONSTRUCTION .