Clutch Operating Cylinder Assembly Removal and Installation: Removal
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
- Clean around reservoir cap of brake master cylinder and take out fluid with syringe or such.
- Dismount transaxle assembly. See MANUAL TRANSAXLE UNIT DISMOUNTING AND REMOUNTING .
- Loosen clutch fluid pipe flare nut (1) of clutch operating cylinder assembly (2).
- Remove clutch pipe joint sleeve (3) from transaxle and then remove clutch fluid pipe (4).
- Remove clutch operating cylinder assembly from transaxle.