Rear Wheel Alignment Inspection: Notes
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Measure toe and camber referring to "Inspection" under FRONT WHEEL ALIGNMENT INSPECTION AND ADJUSTMENT .
NOTE:
Rear suspension is not adjustable structure.
Rear toe (Total)
: IN 5.0 ± 5.0 mm (IN 0.1968 ± 0.1968 in.)
Rear camber
: -1° ± 1°
If measured value is out of specified value, check following items for damage, deformation and crack.
- Rear axle
- Wheel hub or wheel bearing
- Vehicle body