Rear Wheel Speed Sensor Removal and Installation: Installation
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
- Check that no foreign material is attached to sensor and encoder (included in wheel hub assembly).
- Install it by reversing removal procedure.NOTE: Before fitting wheel speed sensor, be sure to silicon grease to its O-ring.
Tightening torque
Rear wheel speed sensor bolt: 11 N.m (1.1 kg-m, 8.0 lbf-ft)
- Check that there is no clearance between sensor (1) and wheel hub.