Relief Valve Removal and Installation: Installation
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Reverse removal procedure noting the following instructions.
- Use new O-ring
- Apply compressor oil to O-ring.
- Tighten relive valve to the specified torque.
Tightening torque
Relief valve (a): 8 N.m (0.8 kg-m, 6.0 lbf-ft)
- Install compressor assembly. Refer to Compressor Assembly Removal and Installation .