Desiccant Removal and Installation: Installation
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
Reverse the removal procedure noting the following instructions.
- Replenish specified amount of compressor oil to compressor suction side referring to in OPERATION PROCEDURE FOR REFRIGERANT CHARGE: MANUAL A/C .
- Do not remove desiccant from the plastic bag until just before inserting it into the receiver.
- Apply compressor oil to O-ring (1).
- Be sure to install circlip (2) with its flat face (3) directed to cap.
- Install condenser assembly referring to CONDENSER ASSEMBLY REMOVAL AND INSTALLATION: MANUAL A/C .
- Evacuate and charge the A/C system referring to "EVACUATION " and "CHARGE " in OPERATION PROCEDURE FOR REFRIGERANT CHARGE: MANUAL A/C .