LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Air Conditioning System - Auto A/C) >> Diagnostic Information and Procedures >> DTC Clearance >> Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn off ignition switch.
  2. Connect SUZUKI scan tool to DLC (1) located on underside of driver side instrument panel.

    Special Tool 

    (A): SUZUKI scan tool (SUZUKI-SDT) 

    Fig 1: Connecting Suzuki Scan Tool To DLC
    G06868757Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn on ignition switch.
  4. Clear DTC according to instructions displayed on SUZUKI scan tool. Refer to SUZUKI scan tool operators manual for further details.
  5. After completing DTC clearance, turn off ignition switch and disconnect SUZUKI scan tool from DLC.
  6. Perform DTC check and confirm that no DTC is displayed on scan tool. See DTC Check :Auto A/C.
scientia non olet · About LEMON Manuals