DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Check that the following conditions are satisfied when using this procedure.
- -10°C (14°F) < ECT < 40°C (104°F)
- -10°C (14°F) < IAT < 40°C (104°F)
- BARO > 75 kPa (0.8 kgf/cm2 , 10.8 psi, 0.75 bar)
- Run engine at idle speed for 1 min.