HVAC Control Unit Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.

Reference: BLOWER SPEED SELECTOR INSPECTION

Reference: AIR INTAKE SELECTOR INSPECTION

Reverse removal procedure noting the following instructions.

Connect temperature control cable and air flow control cable of HVAC control unit to links of HVAC unit.
1. Set air flow selector (1) to "DEF" position and temperature selector (2) to "MAX HOT" position.
  
  Fig 1: Identifying Air Flow Selector Position
  Courtesy of SUZUKI OF AMERICA CORP.
2. Move temperature control lever (1) to "MAX HOT" position "a", then fix temperature control inner cable (2) to pin of temperature control lever and fix outer cable (3) to cable lock clamp (4).
  
  Fig 2: Identifying Temperature Control Lever Position
  Courtesy of SUZUKI OF AMERICA CORP.
3. Move air flow control plate (1) to "DEF" position "b", then fix air flow control inner cable (2) to pin of air flow control plate and fix outer cable (3) to cable lock clamp (4).
  
  Fig 3: Identifying Air Flow Control Plate Position
  Courtesy of SUZUKI OF AMERICA CORP.
  
  NOTE: After installing control cables, make sure that control lever and plate move smoothly and stop at proper position.
Make sure that air flow outlet changes correctly as air flow selector is changed.